Audio channel presets do not save hicut,locut,gain,phase

Use this forum for an overview of issues and to report new ones.
Post Reply
keyma76
New Member
Posts: 23
Joined: Mon Oct 14, 2013 9:30 am
Contact:

Audio channel presets do not save hicut,locut,gain,phase

Post by keyma76 » Sun Dec 03, 2017 1:23 pm

When I add a new blank mono audio track, and then setup the Pre called section (lower left in the EQ-tab) with hi-cut, lo-cut, gain and phase and save this as channel preset, these settings aren't reloaded with the preset.
In fact, if I save these settings to a preset of the "Pre-Section" only, these settings are loaded - but never with the channel preset.
Am I missing something? Do I have to activate this somewhere?

Thank you four your time and help.

[update]
Quick method to reproduce
1. Add a new mono audio channel
2. Edit Low Cut, High Cut filters, flip phase and add some gain
3. Save this channel as a channel preset
4. Reload your just saved preset
--> voila, your settings are lost - reset.
--
| Cubase 10 PRO| 64bit | Windows 8.1 |

keyma76
New Member
Posts: 23
Joined: Mon Oct 14, 2013 9:30 am
Contact:

Channel preset stored incomplete only (pre-section missing)

Post by keyma76 » Tue Feb 20, 2018 8:55 pm

This is still a problem in 9.5.10* - the whole "pre"-Section is not stored with the channel-preset.

*corrected Version to 9.5.10
--
| Cubase 10 PRO| 64bit | Windows 8.1 |

Post Reply

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 4 guests