HELP PLEASE - Issue With Recording Guitar Through my UR22

This section is about Steinberg's UR and UR-RT USB audio interfaces product range
Post Reply
ChumpBender
New Member
Posts: 1
Joined: Mon Dec 31, 2018 11:19 am
Contact:

HELP PLEASE - Issue With Recording Guitar Through my UR22

Post by ChumpBender » Mon Dec 31, 2018 11:23 am

Hi guys,

I am looking to record some guitar on Ableton 10, through my UR22.

I have tried using a jack lead into both of the front inputs, but I can't get it to register any sound from the guitar (it does however register a noise when the cable is being plugged in and unplugged).

I am using a semi-hollow Fender Jaguar.

Any advice ideas on what I might be doing wrong?

**UPDATE** I have installed Cubase 7 and I can't get anything to register on there either.

I have plugged my Roland V-drums in through the same jack input, using the same jack lead and it works.

Thanks

Robingardner
Junior Member
Posts: 121
Joined: Wed Jun 26, 2013 8:22 pm
Contact:

Re: HELP PLEASE - Issue With Recording Guitar Through my UR22

Post by Robingardner » Fri Mar 08, 2019 4:55 am

Hi! You know if the guitar works with an amp?
Computer, OS, RAM & Hdd: Acer (Predator Orion 9000) fulltower computer. Win10 Home, 64-bit. Intel core i-7, 16GB RAM. 256 GB SSD.
Audio Interface: Steinberg UR824
DAW: Cubase Pro 10
USB: All kinds up to SS (super speed).

User avatar
NoGod
New Member
Posts: 2
Joined: Tue Apr 16, 2019 2:32 am
Contact:

Re: HELP PLEASE - Issue With Recording Guitar Through my UR22

Post by NoGod » Tue Apr 16, 2019 5:50 am

Robingardner wrote:
Fri Mar 08, 2019 4:55 am
Hi! You know if the guitar works with an amp?
Yea, check the obvious things. I know they may seem like "Duh," but walking through the basics sometimes unravels the answer. Does the guitar make sound on an amp. Is the output on the Guitar loose. Does the exact same cable work on an amp (rule out the possibility of a bad cable). Are you turning the volume up on the guitar when you plug it into the UR22, Is the correct UR22 input dial simultaneously turned up. Are you using the right input channel on the track (Test this with your drums, don't make a separate track for the drums, use the same track header). Sometimes you need to turn an interface up really loud to hear a line guitar because it's not amped, so don't be afraid to max the volume on the Guitar, and start with the UR22 at straight up (I suggest a strong signal anyways).

If you're getting sound when plugging in, chances are your guitar pickups might have an issue. Big tip: Try changing the pickup switch, (five/ish way lever) chances are not all pickups are bad. Any local shops near you? If you can't get a sound out of an amp, head to a store, and see what they say. They won't charge you to look it at, and they'll shoot you an estimate.

Cheers.

Post Reply

Return to “Steinberg UR Series”

Who is online

Users browsing this forum: No registered users and 6 guests