Trialling Cubase 10 and it crashes when adding a sampler track

Interested in Cubase Pro 10, Cubase Artist 10 or Cubase Elements 10? Having questions regarding the update or upgrade to the latest version? Please post here!
Post Reply
kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Sun May 19, 2019 9:04 pm

Hi, I have a topic for Cubase support which I would like to raise.

I bought a elicensor with the intention of getting cubase 10 Pro. I am testing it out and it always crashes when I insert a sample track. If go to the media bay and right click a sample and insert I get the error code "CreateWicBitmapRenderTarget result = -2003238901".

Is this a cubase error or related to something else on my PC? I'd really like to get to the bottom of this before I pull the trigger on a full licence.

Thanks,
Cubase Error.PNG
(2.4 KiB) Not downloaded yet

Martin.Jirsak
Forum Elder
Posts: 18243
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by Martin.Jirsak » Mon May 20, 2019 12:59 pm

Hi and welcome,

Could you please attacha crash dump file located in Documents/Steinberg/Crash Dumps folder?

What graphics card do you use?

You are on WIndows 10, right?
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

shanabit
Member
Posts: 911
Joined: Thu Dec 16, 2010 5:50 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by shanabit » Mon May 20, 2019 9:09 pm

Make sure you have the latest e licenser console software installed. I had it doing this as well on Mac here with a fresh install of Cubase 10
Non-participating in perpetuity. Enjoy your forum

kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Mon May 20, 2019 9:17 pm

Hi Martin,

I checked and there isn't a crash dumps folder at the location you specified. I am running Windows 10. I did a search on my PC to see if I could find a location for another crash dumps folder, but I was unsuccesful. I can't seem to locate any crash dumps folder in any of the Steinberg or Cubase folders.

Is it possible the install didn't work correctly?

Thanks,

kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Mon May 20, 2019 9:22 pm

shanabit wrote:
Mon May 20, 2019 9:09 pm
Make sure you have the latest e licenser console software installed. I had it doing this as well on Mac here with a fresh install of Cubase 10
I just checked the version number and I have eLC version 6.11.6.1249. I clicked on update to latest version and I see its the same number as the latest version. So I am up to date...

peter2828
New Member
Posts: 2
Joined: Mon May 20, 2019 10:54 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by peter2828 » Mon May 20, 2019 11:01 pm

Anyone can guide me to the elicence. i put in mu activation code i received on my email when i purchased Artist 10. I put it in the elic. and i get a big fat currently there is no elic connected.... bla bla bla. im sure im not the only one that got this...

Please advise anyone

Martin.Jirsak
Forum Elder
Posts: 18243
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by Martin.Jirsak » Tue May 21, 2019 9:39 am

Hi,

What can you see in the This PC/Documents/Steinberg folder, please? I can see following folders:
- CrashDumps
- FX Chain Preset
- Steinberg Projects
- Strip Presets

I don't think that the CrashDumps folder is created during the very first crash. I think the folder should be there immediately after the installation. Therefore I would recommend to try to reinstall Cubase (as administrator).
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

Martin.Jirsak
Forum Elder
Posts: 18243
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by Martin.Jirsak » Tue May 21, 2019 9:41 am

peter2828 wrote:
Mon May 20, 2019 11:01 pm
Anyone can guide me to the elicence. i put in mu activation code i received on my email when i purchased Artist 10. I put it in the elic. and i get a big fat currently there is no elic connected.... bla bla bla. im sure im not the only one that got this...

Please advise anyone
Hi,

First of all I would recommend to don't mess this thread up and make a new thread.

Are you sure you got an Activation Code via email? Wasn't it a Download Access Code?

Can you write the exact error message you got (or attach a screenshot), please?
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Tue May 21, 2019 8:23 pm

Martin.Jirsak wrote:
Tue May 21, 2019 9:39 am
Hi,

What can you see in the This PC/Documents/Steinberg folder, please? I can see following folders:
- CrashDumps
- FX Chain Preset
- Steinberg Projects
- Strip Presets

I don't think that the CrashDumps folder is created during the very first crash. I think the folder should be there immediately after the installation. Therefore I would recommend to try to reinstall Cubase (as administrator).
Hi Martin,

I do not see the crash dumps folder, but I do see the others you have listed there. i will try a reinstall this evening and see how it goes.

Thanks for the help so far!

Kev

kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Tue May 21, 2019 9:15 pm

Hi Martin,

I tried to re-install as admin and the new install did not give me the crash dumps folder - again. I have tried to reinstall at least twice now, with restarts after each install. When I run Cubase I still get exactly the same crash as before and I can't see the sampler track.

I have used Cubase before, so I know my way around the program and its a bit disappointing to not get it to work properly. The install files were downloaded via the download manager so I assume they are the correct size, and there are no errors.

At this point I am about to give up and cut my losses. I bought the eLicensor in good faith with the full expectation of buying Cubase, but I have already spent several hrs just trying to install the program and get it to work. I don't have much more patience and if something isn't working correctly on install then I can't really trust that it will work long term.

Thanks for you help, I will not be buying Cubase, sadly. Lets call this case closed.

Kev

Martin.Jirsak
Forum Elder
Posts: 18243
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by Martin.Jirsak » Tue May 21, 2019 10:55 pm

Hi,

Could you try to trash Cubase preferences (if it has been created already)? Delete the Cubase 10 folder in the %appData% Steinberg, please.
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Sat Oct 05, 2019 10:02 pm

Hi Martin,

I am not sure if you are still following this. If you or anyone could help it would be great. I ended up buying cubase, and I never solved this issue. I can't use the sampler track without getting the same error, even with the latest update.

I do now have a Crashdump folder so that is a step forward. Although it seems as if it isn't always creating a new crash dump. The last one it created is attached.

Computer spec:

Dell Latitude E6520
Processor: i7 2720QM
Ram: 8GB
Windows 10 64 Bit
Graphics Card: NVIDIA NVS 4200M 512MB (45W)

Any help greatly appreciated.
Attachments
Cubase 10.0.30.236 64bit 2019.9.15 0.20.14.309.dmp
(862.26 KiB) Downloaded 19 times

Martin.Jirsak
Forum Elder
Posts: 18243
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by Martin.Jirsak » Tue Oct 08, 2019 2:54 pm

Hi,

Is there a chance you could try in CUbase 10.0.40, please?

Btw, it crashed in the vintage_plug-ins.
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

kev2525
New Member
Posts: 7
Joined: Fri May 17, 2019 10:18 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by kev2525 » Thu Oct 10, 2019 7:49 pm

HI Martin, I have installed the 10.0.40 version and I still get the same issue. It crashed when I try to add a sample track....

Any ideas...

Martin.Jirsak
Forum Elder
Posts: 18243
Joined: Sun Mar 20, 2011 3:52 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by Martin.Jirsak » Tue Oct 22, 2019 1:14 pm

Hi,

Please, wait for the next update. When it still crashes, could you attach the latest crash dump from the latest update, please?
Martin Jirsak
How to show notes of the chord/scale only
Cubase Training

Cubase Pro (last officially supported version all the time)
macOS (last update)

skijumptoes
Member
Posts: 420
Joined: Tue May 07, 2019 9:51 pm
Contact:

Re: Trialling Cubase 10 and it crashes when adding a sampler track

Post by skijumptoes » Tue Oct 22, 2019 4:39 pm

That error at the start of the thread (If it's still the same) is from Direct2D lib and the error code in hex is as follows:-
D2DERR_NO_HARDWARE_DEVICE
0x8899000B
There is no hardware rendering device available for this operation.

If that helps you fix this issue?

Does anything else display odd on your system or warnings from other apps?

Post Reply

Return to “Presales”

Who is online

Users browsing this forum: No registered users and 9 guests