UR824 connected to UR816C via ADAT?

This section is about Steinberg's UR-C audio interfaces product range
Post Reply
glennfin
New Member
Posts: 6
Joined: Fri Nov 22, 2019 7:40 pm
Contact:

UR824 connected to UR816C via ADAT?

Post by glennfin »

Hello;

I have a UR816C on the way which I'd like to connect to my UR824 via ADAT.
I will be using the 816 as the main interface with the UR824 providing 8 additional inputs.
(I'm using Cubase Elements 10)

Questions... I'm not sure how signals are routed.. The UR824 is connected to the 816 via ADAT but still connected to the host via USB?
How will those UR816 ADAT connected UR824 inputs show up in Cubase ? ..... so I will only be using the USB audio stream from the UR816C I assume?

A little confusing..

ca-booter
Member
Posts: 337
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: UR824 connected to UR816C via ADAT?

Post by ca-booter »

I use a Behringer ADA8200 as ADAT extension for the 816. The 816 is connected via USB to the computer and the Behringer is connected via the ADAT ports. The Behringer is set to "SLAVE", that's it. It automaticly syncs to the 816 which is the Master.
The ins and outs show up automaticly in Cubase and in the DspFX mixer you can make the output settings.
Figuring out how to connect everything was a bit complicated for me because the manual is poorly written on this subject.
But also depending on how you will use the ins and outs. All 16 Inputs are easy, but the 8 extra outputs are more complicated.
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

glennfin
New Member
Posts: 6
Joined: Fri Nov 22, 2019 7:40 pm
Contact:

Re: UR824 connected to UR816C via ADAT?

Post by glennfin »

Great... so I assume my ADAT connected UR824 will show up the same way in cubase. I'm just not sure if I'll still be using/need the UR824 USB connection in any way..

ca-booter wrote:
Tue Apr 21, 2020 5:21 pm
I use a Behringer ADA8200 as ADAT extension for the 816. The 816 is connected via USB to the computer and the Behringer is connected via the ADAT ports. The Behringer is set to "SLAVE", that's it. It automaticly syncs to the 816 which is the Master.
The ins and outs show up automaticly in Cubase and in the DspFX mixer you can make the output settings.
Figuring out how to connect everything was a bit complicated for me because the manual is poorly written on this subject.
But also depending on how you will use the ins and outs. All 16 Inputs are easy, but the 8 extra outputs are more complicated.

ca-booter
Member
Posts: 337
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: UR824 connected to UR816C via ADAT?

Post by ca-booter »

Cubase can only handle one interface at once, so the usb connection for the 824 is not needed.
It is just a slave of the 816.
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

glennfin
New Member
Posts: 6
Joined: Fri Nov 22, 2019 7:40 pm
Contact:

Re: UR824 connected to UR816C via ADAT?

Post by glennfin »

Thanks for the help. Understood.
ca-booter wrote:
Tue Apr 21, 2020 9:19 pm
Cubase can only handle one interface at once, so the usb connection for the 824 is not needed.
It is just a slave of the 816.

Post Reply

Return to “Steinberg UR-C Series”

Who is online

Users browsing this forum: No registered users and 1 guest