Problem with offline audio processing

For users of legacy Steinberg Cubase software
Post Reply
Yogimeister
New Member
Posts: 34
Joined: Sat Mar 30, 2013 2:45 pm
Contact:

Problem with offline audio processing

Post by Yogimeister » Sat Mar 30, 2013 2:51 pm

Hi,

I have recently encountered a problem (after a long time running Cubase without this problem)
When processing a piece of audio offline (using the "plug-ins" option) - for example a reverb with a long tail - I get piece of audio that looks ok (the waveform) but the audio fizzles out and cuts off about a second and a half into it (not as shown on the waveform - which is about 7-10 seconds long).

I have tried to restart my computer and open an empty project but the problem persists.



I also had a couple of cubase crashes (blaming my cubase.exe) when playing around with the offline processing in my original (heavy) project.

Can you please help me?

Yogimeister
New Member
Posts: 34
Joined: Sat Mar 30, 2013 2:45 pm
Contact:

Re: Problem with offline audio processing

Post by Yogimeister » Sat Mar 30, 2013 2:57 pm

btw.

if I do a "bounce selection" on the "processed and cutoff" audio part (with the good waveform) - I get a new audio part with a cutoff waveform (which correlates to how it actually sounds)

Yogimeister
New Member
Posts: 34
Joined: Sat Mar 30, 2013 2:45 pm
Contact:

Re: Problem with offline audio processing

Post by Yogimeister » Sat Mar 30, 2013 3:34 pm

Just to relieve any doubt - I was using Reverance and Reverb A

Yogimeister
New Member
Posts: 34
Joined: Sat Mar 30, 2013 2:45 pm
Contact:

Re: Problem with offline audio processing

Post by Yogimeister » Sat Mar 30, 2013 3:55 pm

I am running cubase 5.5 btw ... :)

Guest

Re: Problem with offline audio processing

Post by Guest » Sun Mar 31, 2013 12:25 am

Check tail length setting. Same in new project?

Yogimeister
New Member
Posts: 34
Joined: Sat Mar 30, 2013 2:45 pm
Contact:

Re: Problem with offline audio processing

Post by Yogimeister » Sun Mar 31, 2013 8:30 am

The tail length was set to 10 and 7 seconds ...

I do get a 7 or 10 second audio clip - with full length waveform displayed - but the audio cuts off 1 second into playing it ... (as described above ...)

Suprawill1
Senior Member
Posts: 1007
Joined: Thu Dec 16, 2010 9:56 am
Contact:

Re: Problem with offline audio processing

Post by Suprawill1 » Sun Mar 31, 2013 11:42 pm

Could it be a sample rate problem?
Home built Cooler Master tower - ASUS Prime Z270 MB - Intel Core i7 6700K@4.2G - CM Hyper 212 EVO Cooler - Corsair CX750M PSU - 32G G.Skill Ripjaw V - Dual 24" Monitors - Cubase Pro 10 - Windows 7 Pro 64 - Samsung 960 EVO NVMe - Samsung 850 EVO SSD - Roland Studio Capture Interface - X Touch Controller - Halion 5 - Halion Sonic 2 - Addictive Drums 1&2 - Melodyne 4 - Serato - Kore - Kontact - Morphology Etc Etc

Yogimeister
New Member
Posts: 34
Joined: Sat Mar 30, 2013 2:45 pm
Contact:

Re: Problem with offline audio processing

Post by Yogimeister » Mon Apr 01, 2013 9:19 am

I don't know where a sample rate mismatch could have happened ...

The sample I am using is 44K and so is my project ....

The sample plays fine before offline processing ...

Post Reply

Return to “Older Cubase versions”

Who is online

Users browsing this forum: Mike Warren and 1 guest