Thank you JMC,
I really appreciate you joining in the thread.
I will have a good read later.
But quickly just off the top of my head:
Ok, so the MOOG is still HIGH LEVEL even when I come out of the LO OUTPUT (-10dB). Incidentally, the VOLUME SLIDER on the MOOG was (in all recordings) set to FULL (ie 9/10).
Well if you mean the CUBASE FADERS running into the RED, then no. So no DIGITAL CLIPPING.
Sure, the MOOG produces far more COMPLEX an output than RHODES or GUITAR. However, if I ran the RHODES thru a (say) RING MODULATOR, and then into the MXR DELAY, then would I have the same kind of issue again (because of the complex FREQ’s) although of course this would not be as a result of LINE LEVEL.
Many thanks,
Paul